DTF Hotmelt Powder

Art. nr. DTF-PW-MD Datasheet

This white polyurethane-based DTF hot-melt adhesive powder is suitable for producing standard DTF transfers. Its medium particle size makes the powder suitable for general use with automatic powder shakers and for manual application.

The powder combines good adhesion with softness and flexibility, making it suitable for various types of textiles, including stretch fabrics. According to the supplier, the powder offers excellent wash resistance at 40 and 60 °C.

As the final result depends on the transfer film, ink, textile and machine settings used, we always recommend carrying out a production test first.

Instructions for use

1. Print the design with DTF ink onto the designated side of the transfer film.
2. Apply the powder evenly while the white ink is still wet.
3. Carefully remove any excess powder using an automatic powder shaker or by gently tapping the film.
4. Allow the powder to melt completely in the curing oven. The adhesive surface should be evenly melted and free from loose powder residue.
5. Position the transfer on the textile and press it according to the recommended settings below.
6. Remove the transfer film according to the film manufacturer’s instructions: hot, immediately or after cooling.
7. If necessary, briefly press the transfer again to optimise adhesion and finish.

Recommended pressing settings

• Temperature: 120–150 °C
• Pressing time: 8–15 seconds
• Pressure: 1–3 kg/cm²

The correct settings may vary depending on the textile, transfer film and heat press. Start with the settings recommended for the transfer film and always carry out a test first.

Technical properties

• Colour: white
• Composition: polyurethane
• Particle size: medium
• Typical melting range: 110–120 °C
• Suitable for stretch fabrics
• Wash-resistant at 40 and 60 °C according to the supplier’s assessment

Storage and handling

Store the powder tightly sealed in a dry place. Moisture may cause clumping and interfere with the even distribution of the powder. Always close the packaging immediately after use.

Use suitable extraction and avoid inhaling powder dust. Always consult the corresponding safety data sheet for information on safe handling.

Are you already a customer of TTS, but don't have an account yet? Please send an email to sales@texo-trade.com so that we can provide you with login details. If you are not yet a customer, request an account via the button below. If you already have an account, log in directly to see your prices and be able to order.

Specifications

Article Number

DTF-PWD-MD-24KG-24X01

Quantity per unit	per box
Packed per	24 bags / 1box
Packaging	in box
Package size (cm)	60x41x25
Package weight (kg)	26
Number of units per pallet	480 bags / 20 boxes
Pallet size (cm)	120x80x130
Pallet weight (kg)	540

Were you unable to find what you were looking for?

Please feel free to contact us by phone or email.

Contact our sales team

DTF Hotmelt Powder

This white polyurethane-based DTF hot-melt adhesive powder is suitable for producing standard DTF transfers. Its medium particle size makes the powder suitable for general use with automatic powder shakers and for manual application. The powder combines good adhesion with softness and flexibility, making it suitable for various types of textiles, including stretch fabrics. According to the supplier, the powder offers excellent wash resistance at 40 and 60 °C. As the final result depends on the transfer film, ink, textile and machine settings used, we always recommend carrying out a production test first. Instructions for use 1. Print the design with DTF ink onto the designated side of the transfer film. 2. Apply the powder evenly while the white ink is still wet. 3. Carefully remove any excess powder using an automatic powder shaker or by gently tapping the film. 4. Allow the powder to melt completely in the curing oven. The adhesive surface should be evenly melted and free from loose powder residue. 5. Position the transfer on the textile and press it according to the recommended settings below. 6. Remove the transfer film according to the film manufacturer’s instructions: hot, immediately or after cooling. 7. If necessary, briefly press the transfer again to optimise adhesion and finish. Recommended pressing settings • Temperature: 120–150 °C • Pressing time: 8–15 seconds • Pressure: 1–3 kg/cm² The correct settings may vary depending on the textile, transfer film and heat press. Start with the settings recommended for the transfer film and always carry out a test first. Technical properties • Colour: white • Composition: polyurethane • Particle size: medium • Typical melting range: 110–120 °C • Suitable for stretch fabrics • Wash-resistant at 40 and 60 °C according to the supplier’s assessment Storage and handling Store the powder tightly sealed in a dry place. Moisture may cause clumping and interfere with the even distribution of the powder. Always close the packaging immediately after use. Use suitable extraction and avoid inhaling powder dust. Always consult the corresponding safety data sheet for information on safe handling.