TexoTrans Tranfer Paper
The TexoTrans range offers transfer papers for silkscreen printing with plastisol, water-based and polyurethane inks of all the established ink manufacturers. Transfers printed on TexoTrans transfer papers can be applied to shirts, baseball caps and other textiles. Besides in sheets, the papers are also available in rolls for use on roll-to-roll printing machine.
|
|
CP105 TexoTrans Transfer Paper
Description: A high quality transfer paper for matt finished cold-peel transfers printed with plastisol or water-based inks. CP105 is coated on two sides. The white recommended printing side has a two layer coating designed for maximum ink release. The green/blue back side has a lower release level and can be used when higher peel force is required.
Weight: 105 g/m²
Technical bulletin CP105
|
| |
|
 |
UP105 TexoTrans Transfer Paper
Description: A high quality transfer paper for matt finished, both hot and cold-peel transfers, printed with plastisol inks. UP105 is coated on two sides. The white quilon based coated recommended printing side guarantees an even and complete ink release. The yellow back side has a lower release level and can be used when higher peel force is required.
Weight: 105 g/m²
Technical bulletin UP105
|
| |
|
 |
NCP105 TexoTrans Transfer Paper
Description: A two sides coated transfer paper for cold-peel plastisol transfers. NCP105 gives a smooth and matt transfer finish. NCP105 is an economic priced transfer paper.
Weight: 105 g/m²
Technical bulletin NCP105
|
| |
|
|
|
SP90 / SP105 TexoTrans Transfer Paper
Description: A two sides coated high release transfer paper for making cold-peel plastisol transfers. SP90 / SP105 gives a smooth matt transfer finish and offers excellent dimensional stability. Both the 90 and the 105 g/m² paper are semi-transparent.
Weight: SP90 - 90 g/m² / SP105 - 105 g/m²
Technical bulletin SP90
Technical bulletin SP105
|
 |
HG160 TexoTrans Transfer Paper
Description: Designed for the production of high-gloss and glitter transfers with plastisol inks. The paper is a coated with a special release coating on the surface of the glossy side.
Weight: 160 g/m²
Technical bulletin HG160
|
| |
|
|
|
Interleaving protection paper
Description: TL40, is a bleached and semi-transparent 2 sides siliconized parchment paper. TL40 can be uses as transfer paper for low-cost or single colour printing jobs or as interleaving paper to protect printed transfers when being stocked.
Weight: 41 g/m²
Technical bulletin TL40
|
| |
|
|
|
HS95 TexoTrans Transfer Paper
Description: A two sides printable hot-split transfer paper with excellent ink hold out and
extended shelf life. Using hot-split inks, the smooth paper surface allows for a consistent even split of ink close to its surface.
Weight: 41 g/m²
Technical bulletin HS95
|
| |
|
** Note that TTS’ products must be tested to determine the suitability of the product in combi¬nation with your equipment and methods of use. TTS maximum obligation shall be to replace any product supplied by TTS, which has been proven to be defec¬tive. TTS is not liable for any injury, direct or consequential, arising from the use of, or the inability to use our products.
|
| |
|
| |
|
| |
|
|
